User manual

5-116 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Stand-by Screen
When the TX Analyzer softkey is pressed on the [Initial] screen,
the [TX Analyzer: Stand-by] screen as Figure 5-54 is displayed:
Softkey Menu Field
Softkey Menu 1
• RF Output On/Off: Selects the RF signal output from
On and
Off.
• Trigger Sing/Cont: Selects the trigger mode from
Sing
(single) and
Cont (continuous).
•If you select the
Cont (Continuous measurement) trigger
mode, the continuous measurement starts immediately.
•Switch the
Cont trigger mode to Sing (Single
measurement) to end the measurement.
• Trigger: Performs single measurement of the RF tests when
the trigger mode is set to
Sing.
• More (1 of 2): Displays the Softkey Menu 2.
• Return: Returns to the [Initial] screen.
Softkey Menu 2
Figure 5-54 [TX Analyzer: Stand-by] Screen