User manual

5-114 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
TX Analyzer
Overview
Features of TX Analyzer
• This mode is used to test RF transmission performance of a
mobile phone without call protocol.
Down-link signal setting
• The RF On/Off, BS Level and Modulation settings are linked to
the [Signal Generator] screen.
TX Analyzer settings in Configuration mode
•Loss:
The path loss values for each band can be set on the
[Configuration: Test Condition (Loss)] screen to correct the
RF attenuation between the mobile phone and the Tester.
Refer to “Actual Input/Output Level and Correction" on page 19 for
correction of input/output signal.
• Limits of measurement items:
Each measurement item can be measured and analyzed with
test limits set on the [Configuration: Test Condition] screen.
NOTE
Install the C02 option to use the test function in the 1xEV-DO mode.