User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-111
Result Screen
When the measurement is complete, the [Measuring] result
screen is displayed.
• To disconnect the connection, press the Connection Close
softkey.
• Press the Session Close softkey to close the session from the
tester.
When the call is disconnected, the [Manual Test: Stand-by]
Result Screen (1xEV-DO) during as Table 5-53 is displayed.
•
Pass: Displayed on blue background when the measurement
is passed.
•
Fail: Displayed on red background when the measurement
is failed.
Softkey Menu Field
Softkey Menu 1
•UATI Assign: Executes the UATI assignment.
• BS Call: Executes BS Call. This softkey menu is unavailable
at the Stand-by status, and become available at the
Session Opened status after UATI Assign completed
successfully, then executes BS call.
• Clear Status: Clears (or erases) the pass or fail result in the
test flow.
Figure 5-53 [Manual Test: Stand-by] Result Screen (1xEV-DO)