User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-109
Measuring Screen
During connection, RF test can be executed to measure the
mobile phone performance before the call is released.
Softkey Menu Field
Softkey Menu
• Trigger Sing/Cont: Starts the RF test. Selects the trigger
mode from
Sing (single) and Cont (continuous).
•If you select the
Cont (Continuous measurement) trigger
mode, the continuous measurement starts immediately.
•Switch the
Cont trigger mode to Sing (Single
measurement) to terminate the measurement.
The information of Table 5-30 sent from a mobile phone and the
Testeris displayed on the screen.
Figure 5-52 [Manual Test: Measuring] Measuring Screen (1xEV-DO)