User manual

5-106 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Softkey Menu Field
Softkey Menu
• Trigger Sing/Cont: Measures the Code Domain Power.
Selects the trigger mode from
Sing (single) and Cont
(continuous).
•If you select the
Cont (Continuous measurement) trigger
mode, the continuous measurement starts immediately.
•Switch the
Cont trigger mode to Sing (Single
measurement) to terminate the measurement.
• Trigger: Measures the Code Domain Power. When the
trigger mode is set to "Sing", the measurement is started
after this softkey is pressed.
• More (1 of 2): Displays the Softkey Menu 2.
• Return: Returns to the [Connection] screen.
Figure 5-51 [Manual Test] Code Domain Power Screen ("3GPP2 Config" is set to 3 or 4) (1xEV-DO)