User manual

5-102 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
•Switch the Cont trigger mode to Sing (Single
measurement) to terminate the measurement.
• Trigger: : Starts single measurement of the RF test when
the trigger mode is set to
Sing and the Trigger softkey is
pressed.
• More (1 of 3): Displays the Softkey Menu 2.
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or saves a
graphic file of the screen in a USB memory device
depending on the setting of the Printer input field on the
[Configuration] screen.
• Softer Handoff: Starts the Softer Handoff.
• Code Power: Displays the [Code Domain Power]
measurement screen.
• More (2 of 3): Returns to the Softkey Menu 3.
Softkey Menu 3
• Debug Data > USB: This softkey is unavailable.
• Call Drop Time On/Off: Sets Call Drop Timer to
On or Off.
• More (3 of 3): Returns to the Softkey Menu 1.
Screen Field
Set the input items required to execute tests, referring to the
description shown in Table 5-26.
Table 5-26 Entries on the [Manual Test: Measuring] Connection Screen (1xEV-DO)
Input Item Description
Measuring
mode
Sets On (measure) or Off (not measure) for each measurement group or measurement item..
• TX Power
• Frequency Error
• Multi-code Rho, Origin Offset
• Time Offset
• PER