User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-101
Connection Screen
When call connection between the mobile phone and the Tester
is succeeded, a [Manual Test: Measuring] Connection Screen
(1xEV-DO) as Figure 5-49 is displayed.
If the trigger mode is set to
Cont, continuous measurement of
RF test starts when the [Manual Test: Measuring] Connection
Screen is displayed.
Softkey Menu Field
Softkey Menu 1
• Connection Close: Starts the Connection Close step.
• Meas Max & Min TX Power: Starts to measure the maximum
and minimum transmission powers.
• Clear Status: Clears (or erases) the pass or fail results of
the protocol test.
• Trigger Sing/Cont: Selects the trigger mode of the RF test
from
Sing (single) and Cont (continuous).
•If you select the
Cont (Continuous measurement) trigger
mode, the continuous measurement starts immediately.
Figure 5-49 [Manual Test: Measuring] Connection Screen (1xEV-DO)