User manual

5-100 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
The RF On indicator is displayed at the lower left of the display
when the RF signal from the Tester is present at the RF IN/OUT
connector.
CDT Off is displayed on the lower left of the display only when
the Call Drop Timer is set to
Off.
Message Field
The following message is displayed in the message field on the
[Stand-by] screen:
Press {UATI Assign}.
The word surrounded by {} in the message field denotes the
softkey.
Description
Before beginning the test, press the UATI Assign softkey, turn the
mobile phone on and wait until the UATI Assignment step is
changed to pass. When the UATI Assignment is passed, P is
displayed with blue background in the test results field of the
UATI Assignment test.
SIG-PTN Displays the value of the Signaling Pattern that is set on the [Configuration: Test Condition]
screen.
3GPP2-CONF Displays the value of the 3GPP2-Config that is set on the [Configuration: Test Condition] screen.
Table 5-25 Information from a Mobile Phone displayed on the [Manual Test: Stand-by] Screen (1xEV-DO)
Item Information Description