User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-97
• Trigger: Starts measurement during the Connection status.
This softkey is inactivated in the Stand-by status but
activated in the Connection status.
• More (1 of 3): Displays the Softkey Menu 2.
• Return: Returns to the [Initial] screen.
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or saves a
graphic file of the screen in a USB memory device
depending on the setting of the Printer input field on the
[Configuration] screen.
• RF Output On/Off: Selects the RF power output from
On and
Off. When it is set to On, it is set to the value of BS Level.
When it is set to
OFF, the value is set below -120 dBm.
• System >>: Displays the Softkey Menu 4 to select a system.
Pressing this softkey displays each mode of the installed
options.
• Session Close: This softkey menu is unavailable at the
Stand-by status, and become available at the Session
Opened status after UATI Assign completed successfully,
and executes Session Close.
• Code Power: Displays the [Code Domain Power]
measurement screen.
• More (2 of 3): Returns to the Softkey Menu 3.
Softkey Menu 3
• Debug Data > USB: Stores the debug data into the USB
memory device.
• Call Drop Timer On/Off: Sets Call Drop Timer to
On or Off.
• More (3 of 3): Displays the Softkey Menu 1.
Softkey Menu 4
• GSM: Changes the system to GSM. The G00 option is
required.
• GPRS: Changes the system to
GPRS. The G00 Option is
required.
• EGPRS: Changes the system to
EGPRS. The G00 and G03
Options are required.