User manual

5-94 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Manual Test (1xEV-DO Mode)
This section explains the standard manual test procedure of a
mobile phone in the 1xEV-DO Manual Test mode.
Overview
Features of Manual Test
• All test items are executed while the mobile phone and the
Tester are connected by call control protocol.
• Measurement in the RF test step in the test flow is executed
in a real-time.
• The following systems can be selected directly from the
Manual Test screen.
Required options are in parentheses.
GSM (G00), GPRS (G00), EGPRS (G00, G03), W-CDMA (W00,
W06), HSDPA (W00, W06), cdma2000 MC-1x (C00, C01).
Setting for Manual Test in the Configuration Mode
• Loss:
The path loss values for each band can be set on the
[Configuration: Test Condition (Loss)] screen to correct the
RF attenuation between the mobile phone and the Tester.
Refer to Actual Input/Output Level and Correction on page 4-19 for
correction of input/output signal.
• Limits of measurement items:
Each measurement item can be measured and analyzed with
test limits set on the [Configuration: Test Condition (Limit)]
screen.
NOTE
Install the C02 option to use the test function in the 1xEV-D0 mode.