User manual
5-92 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
• Next Screen: Changes the screen to the next sequence one.
This softkey is inactivated when the sequence 2 is set to
Off or the screen of Sequence 2 is displayed.
• Screen>>: Displays the Softkey Menu 3 containing the
softkeys to select the display mode.
• More (1 of 2): Displays the Softkey Menu 2.
• Return: Returns to the [Initial] screen.
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or saves a
graphic file of the screen in a USB memory device
depending on the setting of the Printer input field on the
[Configuration] screen.
• More (2 of 2): Returns to the Softkey Menu 1.
Softkey Menu 3
• Simple: Displays a Pass/Fail result of whole measurement
in the middle of the measurement result field in zoom.
• Detail: Displays a Pass/Fail result at each item cell in the
measurement result field.
• Value: Displays a measurement value at each item cell in
the measurement result field.
• Cancel: Cancels changing the display mode and returns to
the Softkey Menu 1.
Screen Field
Set the input fields in the screen field according to the following
description of Table 5-21 to execute a new test.
Table 5-21 Input Items on [Automatic Test: Stand-by] Result Screen (1xEV-DO)
Input Field Description
Procedure Specifies a parameter file to be used for the test.
This item displays the file name for the parameter file that is currently in use.
It is also possible to select a parameter file from existing parameter files and specify it as the file to be
used for the test.