User manual

5-88 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Description
Detailed measurement results up to the aborted operation can
be obtained.
The status of the Tester is returned to Stand-by.
The status of the mobile phone is not ensured; therefore, the
mobile phone power-on process is required for a new test.
Sequence 2 Screen
When Sequence 2 is set on the [Configuration: Test Sequence]
screen in the Configuration mode, the test for Sequence 2 start
after completion of Sequence 1 last test.
When Sequence 2 starts, the [Automatic Test: Measuring]
Sequence 2 Screen (1xEV-DO) as Figure 5-44 is displayed.
The status of the sequences is shown on the upper left screen.
The sequence in processing (Sequence 2 now) is underlined.
Test results of sequences are shown as follows:
• P: Displayed on blue background when the test is passed.
• F: Displayed on red background when the test is failed.
Figure 5-44 [Automatic Test: Measuring] Sequence 2 Screen (1xEV-DO)