User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-85
Softkey Menu 2
• Simple: Displays a Pass/Fail result of whole measurement
in the middle of the measurement result field in zoom.
• Detail: Displays a Pass/Fail result at each item cell in the
measurement result field.
• Value: Displays a measurement value at each item cell in
the measurement result field.
• Cancel: Cancels changing the display mode and returns to
the Softkey Menu 1.
Screen Field
The information from the mobile phone as Table 5-20 is
displayed in the screen field.
Message Field
The following message is displayed on [Measuring] screen:
Press the desired softkey.
Table 5-20 Mobile Phone Information on [Automatic Test: Measuring] Screen (1xEV-DO)
Item Information Description
ESN Displays the Electronic Serial Number sent from the mobile phone, with Max. 8 digits.
• Displayed when information can be acquired from the mobile phone.
3GPP-SYS Displays the value for 3GPP System that is set in the [Configuration: Test Sequence] and the
[Configuration: Test Condition] screens.
SIG-PTN Displays the value for Signaling Pattern that is set in the [Configuration: Test Condition] screen.
3GPP2-CONF Displays the value for 3GPP2-Config that is set in the [Configuration: Test Condition] screen.