User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-83
Measuring Screen
When the Start softkey is pressed on the [Automatic Test:
Stand-by] screen, a [Automatic Test: Measuring] screen is
displayed and then a test starts.
The status of sequences is displayed on the upper left corner of
the screen. The sequence under test execution is underlined.
One of the test flow steps is highlighted to show which step is
currently being tested. While the RF Test step is highlighted,
each of the measurement items is highlighted sequentially to
obtain a measurement result.
The test result of sequences and signaling steps are shown as
follows:
• P: Displayed on blue background when the test is passed.
• F: Displayed on red background when the test is failed.
During test, any of the [Automatic Test: Measuring] Simplified
Screen (1xEV-DO) (Figure 5-40), the [Automatic Test:
Measuring] Detailed Screen (1xEV-DO) (Figure 5-41), or the
[Automatic Test: Measuring] Value Screen (1xEV-DO)
(Figure 5-42) is displayed, according to the setting of the Simple,
the Detail or the Value softkey.
Figure 5-40 [Automatic Test: Measuring] Simplified Screen (1xEV-DO)