User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-81
• Next Screen: Displays the next sequence screen. This
softkey is inactive when Sequence 2 is set to
Off or the
Sequence 2 screen is displayed.
• Screen>>: Displays the Softkey Menu 3 containing the
softkeys to select the display mode.
• More (1 of 2): Displays the Softkey Menu 2.
• Return: Returns to the [Initial] screen.
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or saves a
graphic file of the screen in a USB memory device
depending on the setting of the Printer input field on the
[Configuration] screen.
• More (2 of 2): Returns to the Softkey Menu 1.
Softkey Menu 3
• Simple: Displays a Pass or Fail result of whole measurement
in the middle of the measurement result field in
zoom.
• Detail: Displays a Pass or Fail result at each item cell in the
measurement result field.
• Value: Displays a measurement value at each item cell in the
measurement result field.
• Cancel: Cancels selecting the display mode and returns to the
softkey menu 1.
Screen Fields
The input fields of parameters except procedure are protected if
the Panel Key is set to
Lock on the [Configuration] screen.
Set the input fields in the screen field according to the following
description of Table 5-18 to execute a new test.