User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-73
Softkey Menu Field
Softkey Menu 1
• Location Update: Executes the Location Update process in
the Tester. When the softkey is pressed, the NID and the
SID on the broadcast information are changed to the Rgstr
NID and the Rgstr SID setting on the [Configuration: Test
Condition] screen.
• BS Call: Executes BS Call.
• Clear Status: Clears Pass/Fail results at signaling steps in
the test flow.
• Trigger Sing/Cont: Executes RF test. Selects the trigger
mode from
Sing (single) and Cont (continuous).
•Selecting
Cont as the trigger mode will immediately start
the continuous measurement.
•Changing the trigger mode from
Cont to Sing will end
the measurement.
Figure 5-36 [Manual Test: Stand-by] MS Call Result Screen (MC-1x)