User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-69
Message Field
The following message is displayed in the message field on the
[Measuring] Code Domain Power screen:
Press the desired softkey.
Table 5-16 Mobile Phone Information on [Manual Test: Measuring] Code Domain Power Screen (MC-1x)
Item
Information
Description
Caller ID Display the Caller ID notification setting.
When the Caller ID notification is set to ON, the Tester notifies the Caller ID to the mobile phone at BS
Call step.
Procedure Displays the file name of the parameter file in current use.
Radio System Displays CDMA2000 on the lower left of the screen.
Service Option Displays the selected service option.
Radio Config Displays Radio Configuration setting.
SCH Rate Displays the specified SCH rate. This item is displayed only when Radio Config is set to F3R3, F4R3 or
F5R4.
SCH Encoder Displays the specified SCH encode type. This item is displayed only when Radio Config is set to F3R3,
F4R3 or F5R4.
SCH Level Displays the specified SCH level. This item is displayed only when Radio Config is set to F3R3, F4R3 or
F5R4.
3GPP-SYS Displays the value for 3GPP System that is set in the [Configuration: Test Sequence] and the
[Configuration: Test Condition] screens.
SIG-PTN Displays the value for Signaling Pattern that is set in the [Configuration: Test Condition] screen.
3GPP2-CONF Displays the value for 3GPP2-Config that is set in the [Configuration: Test Condition] screen.