User manual

5-62 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Softkey Menu Field
Softkey Menu 1
• Release: Starts the BS release step.
• Meas Max & Min TX Power: Starts measuring the maximum
and minimum transmission powers. This softkey is not
available when the Service Option is set to
1, 3, 17, or
32768.
• Clear Status: Clears Pass/Fail results of the protocol test.
• Trigger Sing/Cont: Selects
Sing (single measurement) or
Cont (continuous measurement) as the trigger mode. This
softkey is not available when the Service Option is set to
1,
3, 17, or 32768.
•Selecting
Cont as the trigger mode will immediately start
the continuous measurement during the Connection
status.
•Changing the trigger mode from
Cont to Sing will
terminate the measurement.
• Trigger: Starts single measurement of the RF test when the
trigger mode is set to Sing and the Trigger softkey is
pressed. This softkey is not available when the Service
Option is set to
1, 3, 17, or 32768.
Figure 5-31 [Manual Test: Measuring] MS Call Connection Screen (MC-1x)