User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-57
PWR CNTL
*
Specifies the power control bit to control TX Power of the mobile phone. The allowable setting is as
follows:
Stand-by status
• HOLD
• CNT UP (Continuous up)
• CNT DWN (Continuous down)
Measuring (Connection) status
• HOLD
• UP
• DOWN
• CNT UP (Continuous up)
• CNT DWN (Continuous down)
This field cannot specify when the "Service Option" is set to 1, 3, 17 or 32768 (voice call is selected).
Max Frames
*
Specify the number of frames to measure Frame Error Ratio.
The allowable range is as follows: 25 to 10000000
Confidence Selects confidence level of the Frame Error Ratio Measurement.
Select 95% or Off.
Radio Config Selects Radio Configuration. The allowable setting is as follows:
• F1R1 (Forward 1, Reverse 1)
• F2R2 (Forward 2, Reverse 2)
• F3R3 (Forward 3, Reverse 3)
• F4R3 (Forward 4, Reverse 3)
• F5R4 (Forward 5, Reverse 4)
When the F1R1 or F2R2 is selected, the waveform quality is displayed as Rho. When the others are
selected, Multi-code Rho is displayed.
SCH Rate Selects data rate of the forward supplemental Channel.
This item is displayed only when the Radio Config is set to F3R3, F4R3 or F4R3 with the Service Option
setting of 32.
• Radio Config: Selects F3R3
9.6, 19.2, 38.4, 76.8, 153.6 kbps
• Radio Config: Selects F4R3
9.6, 19.2, 38.4, 76.8, 153.6 kbps
• Radio Config: Selects F5R4
14.4, 28.8, 57.6, 115.2, 230.4 kbps
SCH Encoder Selects encoder type of the forward supplemental Channel. This item is displayed only when the Radio
Config is set to F3R3, F4R3, or F5R4 with the Service Option setting of 32.
• CONV (Convolutional)
• TURB (Turbo)
When SCH Rate is 9.6 kbps or 14.4 kbps, TURB cannot be selected.
Table 5-11 Input Items in [Manual Test: Stand-by] Screen (MC-1x)
Input Field Description