User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-53
Stand-by Screen
When the Manual Test softkey is pressed on the [Initial] screen,
the [Manual Test: Stand-by] Screen (MC-1x) as Figure 5-28 is
displayed.
Softkey Menu Field
Softkey Menu 1
• Location Update: Executes the Location Update process in
the Tester. When the softkey is pressed, the NID and the
SID on the broadcast information are changed to the Rgstr
NID and the Rgstr SID setting on the [Configuration: Test
Condition] screen.
• BS Call: Executes BS Call.
• Clear Status: Clears Pass/Fail results in the test flow.
• Trigger Sing/Cont: Executes RF test. Selects the trigger
mode from
Sing (single) and Cont (continuous).
•The continuous measurement is immediately started
during the Connection status when the trigger mode is
set to
Cont.
Figure 5-28 [Manual Test: Stand-by] Screen (MC-1x)