User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-51
Manual Test (MC-1x Mode)
Overview
Feature of Manual Test
• All test items are executed while the mobile phone and the
Tester are connected by call control protocol.
• Measurement in the Talk/RF test step in the test flow is
executed in a real-time.
• The following systems can be selected directly from the
Manual Test screen. Required options are in parentheses.
GSM (G00), GPRS (G00), EGPRS (G00, G03), W-CDMA (W00),
HSDPA (W00, W06), cdma2000 - 1xEV-DO (C00, C01, C02)
Setting Manual Test in the Configuration Mode
• Loss:
The path loss values for each band can be set on the
[Configuration] screen to correct the RF attenuation
between the mobile phone and the Tester. Refer to Actual
Input/Output Level and Correction on page 4-19 for correction of
input/output signal.
• Limits of measurement items:
Each measurement item can be measured and analyzed with
test limits set on the [Configuration: Test Condition (Limit)]
screen.