User manual

5-50 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Message Field
The following message is displayed in the message field on the
[Stand-by] Result screen:
Press {Start} to begin a test.
The word surrounded by {} in the message field denotes the
softkey.
Table 5-9 Items that provide information from the Mobile Phone and the Tester on the [Automatic Test: Stand-by]
Result Screen (MC-1x)
Item Information Description
IMSI Displays the International Mobile Subscriber Identity sent from the mobile phone.
ESN Displays the international mobile station identity that is sent from the mobile phone.
Caller ID Displays dialer number sent from the Tester at BS Call step.
Dialed No. Displays the number dialed from the mobile phone at MS Call step.
3GPP-SYS Displays the value of the 3GPP System that is set on the [Configuration: Test Sequence] and the
[Configuration: Test Condition] screens.
SIG-PTN Displays the value of the Signaling Pattern that is set on the [Configuration: Test Condition]
screen.
3GPP2-CONF Displays the value of the 3GPP2-Config that is set on the [Configuration: Test Condition] screen.