User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-49
Softkey Menu 3
• Simple: Displays a Pass/Fail result of whole measurement
in the middle of the measurement result field in zoom.
• Detail: Displays a Pass/Fail result at each item cell in the
measurement result field.
• Value: Displays a measurement value at each item cell in
the measurement result field.
• Cancel: Cancels changing the display mode and returns to
the softkey menu 1.
Screen Field
Set the input fields in the screen field according to the following
description of Table 5-8 to execute a new test.
The information from the mobile phone as Table 5-9 is displayed
in the screen field.
Table 5-8 [Automatic Test: Stand-by] Result Screen Input Field (MC-1x)
Input Field Description
Procedure Specify a parameter file to be used for the test.
This item displays the file name for the parameter file that is currently in use.
It is also possible to select a parameter file from existing parameter files and specify it as the file to be
used for the test.
RFCH
*
Specify the band and channel number. This parameter can be changed when in the stand-by status.
The allowable range of channel number for each band is as follows:
• B0(Cel US): 1024 to 1323CH, 991 to 1023CH, 1 to 799CH
• B1(PCS US): 0 to 1199CH
• B3(Cel JP): 1041 to 1199CH, 1201 to 1600CH, 801 to 1039CH, 1 to 799CH
• B4(PCS KR): 0 to 599CH
• B6(IMT-2K): 0 to 1199CH
• "----":Skip
Refer to Appendix B, Channel frequency and channel number for details.
* The changing magnification softkey is available. Refer to Storing Numeric Values on page 4-10 and Changing Magnification Softkey on
page 4-13.