User manual

5-46 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Measurement Result Display Screen
When all the pre-configured tests are finished, the measurement
results are displayed in the stand-by screens.
The results are displayed on the [Automatic Test: Stand-by]
Result Simplified Screen for Measurement Results (MC-1x)
(Figure 5-25), the [Automatic Test: Stand-by] Result Detailed
Screen (MC-1x) for Measurement Results (Figure 5-26) or the
[Automatic Test: Stand-by] Result Value Screen (MC-1x) for
Measurement Results (Figure 5-27) depending on the previous
setting of the Simple, the Detail or the Value softkey.
Measurement results are shown as follows:
•
Pass or measurement value: Displayed on blue background
when the measurement is passed.
•
Fail or measurement value: Displayed on red background
when the measurement is failed.
Measurement result is shown depending on the display mode.
• On the result simplified screen, an enlarged
Pass is shown in
the center of the measurement result field when all
measurement items are passed. An enlarged
Fail is shown
when at least one measurement item is failed.
• On the result detailed screen, a Pass or Fail measurement
result is shown at each item cell in the measurement result
field.
• On the result value screen, a measurement value is shown at
each item cell in the measurement result field.
When some test items and measurement items are set to be
skipped on the [Configuration: Test Sequence] screen, each
result of test items and measurement items is shown by – or —.
Figure 5-25, Figure 5-26, and Figure 5-27 are the screens when
both Sequence 1 and Sequence 2 are set to execute.