User manual

5-44 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Sequence 2 Screen
When Sequence 2 is set on the [Configuration: Test Sequence]
screen in the Configuration mode, Sequence 2 start after
completion in Sequence 1.
When Sequence 2 is started, the [Automatic Test: Measuring]
Sequence 2 Screen (MC-1x) as Figure 5-24 is displayed.
(Figure 5-24 shows a screen changing to Sequence 2, when
Sequence 1 is set to cdma2000 MC-1x, Sequence 2 is set to
cdma2000 MC-1x, and System Handoff, the 11th of Sequence 1,
is set to BS Release (Run).)
The sequences state is shown on the upper left screen. The
sequence in processing (Sequence 2 now) is underlined.
Test result of sequences is shown as follows:
• P: Displays on blue background when the test is passed.
• F: Displays on red background when the test is failed.
Softkey Menu 1
• Screen>>: Displays the softkey menu 2 containing the
softkeys to select the display mode.
• Abort: Aborts the test and returns to the [Stand-by] screen.
Figure 5-24 [Automatic Test: Measuring] Sequence 2 Screen (MC-1x)