User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-43
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or saves a
graphic file of the screen in a USB memory device
depending on the setting of the Printer input field on the
[Configuration] screen.
• More (2 of 2): Returns to the softkey menu 1.
Softkey Menu 3
• Simple: Displays a Pass/Fail result of whole measurement
in the middle of the measurement result field in zoom.
• Detail: Displays a Pass/Fail result at each item cell in the
measurement result field.
• Value: Displays a measurement value at each item cell in
the measurement result field.
• Cancel: Cancels changing the display mode and returns to
the softkey menu 1.
Screen Field
The information in the screen field is displayed. Refer to
Table 5-5 and Table 5-7. The input field in the screen field can
be changed for a new test.
Message Field
The following message is displayed in the message field on the
[abort] screen.
Press [Start] to begin a test.
The word surrounded by [ ] in the message field denotes the
softkey.
Description
The measurement results up to an abort of the test are shown.
The status of the Tester is returned to stand-by.
The status of the mobile phone is not ensured; therefore, the
mobile phone power-on process is required for a new test.