User manual

5-42 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Aborted screen
When the Abort softkey is pressed, the measurement is aborted.
Any of the [Automatic Test: Stand-by] Aborted Simplified
Screen (MC-1x), the [Automatic Test: Stand-by] Aborted
Detailed Screen, or the [Automatic Test: Measuring] Aborted
Value Screen is displayed, depending on the previous setting of
the Simple, the Detail or the Value softkey. Figure 5-23 is a screen
with the Simple softkey setting.
Softkey Menu Field
Softkey Menu 1
• Start: Starts testing the mobile phone by the Automatic
Test.
• Previous Screen: Displays the previous sequence screen.
This softkey is inactivated when the screen for the
sequence 1 is displayed.
• Next Screen: Displays the next sequence screen. This
softkey is inactivate when the sequence 2 is set to
Off or
the screen of Sequence 2 is displayed.
• Screen>>: Displays the softkey menu 3 to select the
display mode.
• More (1 of 2): Displays the softkey menu 2.
• Return: Returns to the [Initial] screen.
Figure 5-23 [Automatic Test: Stand-by] Aborted Simplified Screen (MC-1x)