User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-41
• Fail: Press this softkey if the loop back voice is of poor
quality or the voice does not loop back. Then this softkey
disappears and F is shown next to the Ta lk step.
• Screen>>: Displays the softkey menu 2 containing the
softkeys to select the display mode.
• Abort: Aborts the test and returns to the [Stand-by] screen.
Softkey Menu 2
• Simple: Displays a Pass/Fail result of whole measurement
in the middle of the measurement result field in zoom.
• Detail: Displays a Pass/Fail result at each item cell in the
measurement result field.
• Value: Displays a measurement value at each item cell in
the measurement result field.
• Cancel: Cancels changing the display mode and returns to
the softkey menu 1.
Screen fields
During the test, the operator must respond to operation or
Tester messages by pressing the appropriate softkeys of the
Tester or by pressing the mobile phone's button.
The information from the mobile phone is displayed at the
upper right corner in the screen field. Refer to Table 5-7.
Message Field
The following message is displayed in the message field during
Talk test on [Measuring] screens which determines the quality
of the loop back voice.
Press {Pass} or {Fail} for Talk test.
The word surrounded by {} in the message field denotes the
softkey.