User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-35
Message Field
The following message is displayed in the message field on the
[Stand-by] screen:
Press {Start} to begin a test.
The word surrounded by {} in the message field denotes the
softkey.
3GPP-SYS Displays the value of the 3GPP System that is set on the [Configuration: Test Sequence] and the
[Configuration: Test Condition] screens.
SIG-PTN Displays the value of the Signaling Pattern that is set on the [Configuration: Test Condition]
screen.
3GPP2-CONF Displays the value of the 3GPP2-Config that is set on the [Configuration: Test Condition] screen.
Table 5-6 Items that provide information from the Mobile Phone and the Tester on the [Automatic Test: Stand-by]
Screen (MC-1x)
Item Information Description