User manual

5-28 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Softkey Menu Field
Softkey Menu
• Factory Default: All the parameters of the Tester other than
parameters related to external control revert to the
default. They revert to the factory default. After selecting
this softkey, the [Top Menu] screen or the [Initial] screen
for the cdma2000 appear. This influences the parameters
of GSM, W-CDMA, and cdma2000.
• Starting Condition: Values in the input items revert to those
values when the Tester was booted. The softkey memory
(channel, frequency, and level) and the values for the
Caller ID and for the Authentication Key that were set
through the external control commands do not revert.
After selecting this softkey, the [Top Menu] screen or the
[Initial] screen for the cdma2000 appear. This influences
the parameters of GSM, W-CDMA, and cdma2000.
• Do nothing: Initialization of the parameters is not
performed. After selecting this softkey, the [Top Menu]
screen or the [Initial] screen for the cdma2000 appears.
Figure 5-13 [PRESET Mode Selection] Screen (cdma2000)