User manual

5-24 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
• CDMA Mode>>: Selects the CDMA mode. Displays the Sub
Softkey Menu 3 to select the mode from MC-1x or 1xEV-DO.
• More (1 of 2): Displays the Softkey Menu 2.
• Config: Displays the [Configuration] screen. Refer to
Configuration on page 5-137.
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or stores the
screen image in the USB memory, according to the Printer
field on the [Configuration] screen.
• Return to Menu: Displays the screen to return to the [Top
Menu] screen. Refer to Return to Menu Screen on
page 5-26.
• More (2 of 2): Returns to the Softkey Menu 1.
Softkey Menu 3
• MC-1x: Changes the system to the MC-1x mode of the
CDMA Mode. The C00 and C01 option are required.
• 1xEV-DO: Changes the system to the 1xEV-DO mode of the
CDMA Mode. The C00, C01 and C02 options are required.
• Cancel: Cancels changing the CDMA mode and returns to
the Softkey Menu 1.
Screen Field
The firmware name and revision number currently installed are
shown. In addition, it displays the current cdma mode.
Set the input field in the screen field according to the following
description of Table 5-3.
Table 5-3 Input Items on the [Initial] Screen
Input Field Description
Procedure Specifies a parameter file to be used for the test.
This item displays the file name for the parameter file that is currently in use.
It is also possible to select a parameter file from existing parameter files and specify it as the file to
be used for the test. For this, up to 4 files are displayed.