User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-23
Initial Screen
When the CDMA2000 softkey on the [Top Menu] screen is
pressed, the [Initial] screen as Figure 5-10 is displayed.
This screen is used to select one of the function modes or to
return to the [Top Menu] screen.
To return to the [Initial] screen from any function mode, press
the Return softkey (multiple times if necessary).
Softkey Menu Field
Softkey Menu
• Automatic Test: Displays the [Auto Test: Stand-by] screen.
Refer to Automatic Test (MC-1x Mode) on page 5-29.
• Manual Test: Displays the [Manual Test: Stand-by] screen.
Refer to Manual Test (MC-1x Mode), or Manual Test
(1xEV-DO Mode).
• TX Analyzer: Displays the [TX Analyzer: Stand-by] screen.
Refer to TX Analyzer.
• Signal Generator: Displays the [Signal Generator] screen.
Refer to Signal Generator.
Figure 5-10 [Initial] Screen