User manual

5-22 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
In addition, this screen displays the following information:
• MAC address.
• Status:
• Shows how each address is configured. (unmodifiable.)
• If any abnormality is detected in the IP Addr/Mask
setting, Invalid will be displayed.
• If any abnormality is detected in the Default Gateway
setting, Invalid will be displayed.
• If the Tester and the Default Gateway does not belong to
the same subnet as this instrument, Unreachable will be
displayed.
• If any abnormality is detected in the Gateway setting,
Invalid will be displayed.
• If the Tester and gateway does not belong to the same
network, Unreachable will be displayed.
Gateway Sets the gateway addresses for gateway setting from 1 through 5. Allowable settings are as follows:
• 1.0.0.1 to 223.255.255.255 (From 192.168.1.1 to 192.168.1.255 are unavailable to
setting.)
• The IP address setting supports Class A through C.
• The Tester does not support Class D (multicast address) and Class E (reserved address).
• A gateway setting is valid when you set the allowable address and the Tester and the Gateway
belong to the same network..
• If the Gateway setting is set to NONE when booting, the address will be displayed as (0.0.0.0),
which means invalid.
• If the Tester and Gateway do not belong to the same network, Unreachable will be displayed in
the Status field.
• The Gateway setting takes effect after the Apply Address softkey is pressed.
CIDR Set the subnet masks for the destination address in CIDR format from Setting 1 through 5.
Allowable setting values are as follows:
• None or 1 to 31.
• If the CIDR is set to None, the Host/Net setting is treated as a host address.
• If the CIDR is set to other than None, the Host/Net setting is treated as a network address.
• If the Gateway setting is disabled when booting, None will be displayed in the CIDR field.
• Changes to the mask setting is effective after pressing the Apply Address softkey.
Table 5-2 Input Items on the [Network Setting] Screen (continued)
Input Field Description