User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-15
Message Field
The following messages are displayed depending on the state:
• Press [Update xxxx] to update. (This message is
displayed if any firmware exists in the USB memory.)
• Press [Update System] to update. ("xxxx") (This
message is displayed when the available firmware files
exist at the file storage area specified by the selected
Update Type.)
• System condition error. Please execute system update.
• USB memory is not inserted.
• USB memory is accessed now. [ Don't remove a USB
memory! ]
• No update file exists in the inserted USB memory
device.
• No update file exists.
• Cannot get file-list from ftp server.
• Processing… [Don't remove a USB memory!]
• Processing…
• Completed!
• Completed! ("xxxx")
• FW-Update failed [Error number]
NOTE
Before pressing the FW Update softkey, make sure that the appropriate
firmware files are placed at the file storage area specified by the selected
Update Type.