User manual

5-10 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Option Installation/Backup
On the [Configuration] screen, you can install/back up option
functions such as C01, C02, W00, and G00.
Option Installation
Install option functions to the Tester. There are two way to
install it. One is using a USB memory device. The other is not
using a USB memory device.
Using a USB memory Device
Prepare a USB memory device which contains an option key.
1 Press the Config softkey on the [Top menu] screen to display
[Configuration] screen.
2 Insert USB memory device containing the Option Key into
the USB connector on the front panel of the Tester.
3 Press the Option Install softkey.
4 Confirm an option number is added on the Option field of the
screen, and remove the memory device from the tester.
Unusing a USB memory Device
Prepare the 16-digit option key/don't insert a USB memory
device to the USB connector on the front panel of the Tester.
1 Press the Config softkey on the [Top Menu] screen to display
the [Configuration] screen.
2 Sets the 16-digit option key to the Option Install field with the
CURSOR CONTROL knob.
3 Press the Option Install softkey.
NOTE
To install options, the option key suitable for required option is necessary.
For further information, contact the Agilent Sales Department or an
authorized distributor.