User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-9
Also, the following information is shown in the screen field:
• MAC Address
• Serial Number
• Options that are already installed. If no option is installed on
the Tester, this area will be blank.
Beeper Sets the beep sound.
Selects On or Off.
• On: Beeps for each step of operation.
• Off: Beeps only for noticing some errors and warnings.
AutoBoot Selects the system for automatic boot when a certain time (time-out period) has passed since the [Top
Menu] screen was displayed.
• Application: Sets the system from the followings
• None: Not automatically boots
• FUNC GSM: Boots the GSM option
• FUNC WCDMA: Boots the W-CDMA option
• FUNC CDMA2000:Boots the cdma2000 option
• Timer: Sets the timeout timer from 10 to 60 seconds, or -. The timer is stopped if any softkey is
pressed.
• —: Invalid when Application is set to None.
• 10 to 60: Specifies timeout timer.
Date/ Time
*
Sets the current date and time in the following formats:
• YYYY: Sets the year. The allowable range is from 1990 to 2037.
• MM: Sets the month. The allowable range is from 01 to 12.
• DD: Sets the day. The allowable range is from 01 to 31.
• HH: Sets the hour. The allowable range is from 00 to 23.
• MM: Sets the minute. The allowable range is from 00 to 59.
Option Install Installs Option. Set 16-digit option key and press
Option Install softkey without USB memory inserted.
* The changing magnification softkey is available. Refer to Storing Numeric Values on page 4-10 and Changing Magnification
Softkey on page 4-13.
Table 5-1 Input Items on the [Configuration] Screen
Input Field Description