User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-7
Softkey Menu Field
Softkey Menu
• Print Screen: Prints a hardcopy of the screen or saves it in a
USB memory device depending on the setting of the Printer
input field on the [Configuration] screen.
• FW Update: Displays the [Firmware Update] screen.
• Network Setting: Displays the [Network Setting] screen.
• Option Install: Used to install option functions to display in
E01 or E02.
• Option Backup: Backs up the installed option functions.
• Return: Returns to the [Top Menu] screen.
When the Option E02 is not installed in the Tester, the GP-IB
field is displayed in gray (inactivated) as shown in Figure 5-5.
When the Option E01 is not installed in the Tester, the Serial Port
GP-IB field is displayed in gray (inactivated) as Figure 5-6.
Figure 5-5 Part of [Configuration] screen (without Option E02)
Figure 5-6 Part of [Configuration] screen (without Option E01)