User manual

5-6 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Configuration Screen
When the Config softkey is pressed on the [Top Menu] screen,
the [Configuration] screen as Figure 5-4 is displayed. If the
option E02 is not installed, the screen is as shown in Figure 5-5;
if the option E01 is not installed, the screen is as shown in
Figure 5-6.
The following various conditions are set on this screen.
• Signal decrease of internal/external reference signal
• Interface for external control
• Date and time
• Printer
• Beeper
• Automatic Boot
Figure 5-4 [Configuration] Screen