User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-5
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or saves an
image file of the screen into a USB memory device
depending on the setting of the Printer field on the
[Configuration] screen.
• Reboot: Aborts the current system and returns the [Top
Menu] screen after reboots the Tester.
• More (2 of 2): Displays the Softkey Menu 1.
Screen Field
This area displays the name, revision number, serial number,
and other information of the firmware that is currently
installed.
Message Field
The following message is displayed in the message field:
Select a Radio System or Configuration.
NOTE
When the Autoboot function is set to FUNC GSM, FUNC WCDMA, or FUNC
CDMA2000
, the Tester will automatically displays the [Initial] screen for
the GSM, W-CDMA or cdma2000 system mode if no softkey is pressed
within the specified time (10 to 60 seconds). When the Tester is shipped,
the AutoBoot function is set to
None.