User manual

4-74 N9360A Multi UE Tester CDMA2000 User Manual
4 Operating Procedure
Ending a Test
Disconnecting the Mobile Phone
Disconnect the mobile phone from the connection cable or the
antenna coupler.
Turning off the Tester
Turn off the Tester with the following procedure.
1 Press the LINE switch on the front panel of the Tester for
more than one second.
2 The display blacks out, and the LINE LED on the front panel
is lit in orange.
3 The power is turned off except the reference oscillator in the
Tester.
4 Turn off the Line switch on the rear panel of the Tester to
turn off the reference oscillator.
5 All power including the reference oscillator is turned off and
the LINE LED goes off.
CAUTION
In the Tester, the HDD is used for storage.
Do not turn off the Line switch on the rear panel of the Tester while
the LINE LED on the front panel of the Tester is lit in green.
Otherwise, Tester failure may occur.