User manual

Operating Procedures 4
N9360A Multi UE Tester W-CDMA User Manual 4-59
Testing a Mobile Phone by Manual Test (HSDPA Mode)
This section describes the operation method of the Manual Test
HSDPA mode.
1 Turn on the Tester and select the W-CDMA system on the
Top menu screen. Refer to
“System Selection" on
page 4-14 about selection of the system.
2 The [Initial] screen as Figure 4-48 is displayed after
completion of initialization and self-test routine of the
Tester.
Figure 4-48 [Initial] Screen
NOTE
Install the Option W06 when using the HSDPA function.