User manual

4-58 N9360A Multi UE Tester W-CDMA User Manual
4 Operating Procedures
11 When MS Call connects, the screen in Figure 4-47 is
displayed. "Emergency Call" is displayed at the "Dialed
No.:" field on the screen. CPICH RSCP is reported from the
mobile phone when the "CPICH RSCP" field is set to "On".
Figure 4-47 [Manual Test: Measuring] Emergency Call Screen
12 At the "Connection (AMR)" step, the Tester returns voice
back to the mobile phone. Check the voice quality.
13 Also, CPICH RSCP can be measured at the "Connection
(AMR)" step. Press the Measurement CPICH RSCP softkey to
make the mobile phone report the value of CPICH RSCP,
and then the value will be displayed.
14 Finish the call.
Press an On Hook button on the mobile phone to start MS
Release, or press the Release softkey to start BS.
15 The user can save this test procedure in the HDD inside
the Tester or a USB memory device. Refer to
“Saving Test
Setup File" on page 5-171.