User manual

Operating Procedures 4
N9360A Multi UE Tester W-CDMA User Manual 4-57
Figure 4-46 [Manual Test: Stand-by] Screen
7 Set the input fields.
8 Turn on the mobile phone.
9 Make an emergency call on the mobile phone to start MS
Call. Dial the emergency call number and press an Off
Hook button on the mobile phone.
10 If the "Connection Wait" field on the: Test Condition
screen is set to any number other than 0, the Answer
softkey is displayed when manually responding to the call
from the mobile phone becomes accepted on the tester.
Press the Answer softkey within the specified time to
respond to MS Call. When the specified time is over, the
tester automatically responds to MS Call. If the
"Connection Wait" field is set to 0, the Tester
automatically responds to the call immediately.