User manual

Operating Procedures 4
N9360A Multi UE Tester W-CDMA User Manual 4-51
Figure 4-40 [Manual Test: Measuring] Connection Screen
12 Change the channel with the following operation.
Move the cursor to RFCH input field and press the
CURSOR CONTROL knob. Rotate the CURSOR CONTROL
knob to select the channel for handover. Press the
CURSOR CONTROL knob. Then, the Handover step is
highlighted and the channel changes to the selected
channel. When handover is completed, P is shown at the
Handover step.
13 Press More (1 of 2) > System H.O. softkeys to start system
handover. The mobile phone automatically responds to
the call from the Tester.