User manual

Operating Procedures 4
N9360A Multi UE Tester W-CDMA User Manual 4-49
Figure 4-38 [Manual Test: Stand-by] Screen
8 Set the input fields.
Set the "BS Call" field to "RMC".
9 Set required parameters for GSM. Press More (1 of 2),
System>> and GSM softkeys to display Manual Test (GSM)
screen. Refer to the N9360A Multi UE Tester GSM User
Manual for GSM settings. Press More (1 of 2), System>> and
W-CDMA softkey to return to W-CDMA.
10 Turn on the mobile phone. The display status changes
from Stand-by to Measuring. After completion of location
update, the display status returns to Stand-by.