User manual

4-42 N9360A Multi UE Tester W-CDMA User Manual
4 Operating Procedures
Figure 4-32 [Manual Test: Stand-by] Screen After Location Update
10 Make a call on the mobile phone to start MS Call. Dial an
arbitrary and press the Off Hook button on the mobile
phone.
11 If the "Connection Wait" field on the [Configuration: Test
Condition] screen is set to any number other than 0, the
Answer softkey is displayed when manually responding to
the call from the mobile phone becomes acceptable on the
Tester. Press the Answer softkey within the specified time
to respond to MS Call. When the specified time is over, the
Tester automatically responds to MS Call. If the
"Connection Wait" field is set to 0, the tester automatically
responds to the call immediately.
12 CPICH RSCP is reported from the mobile phone when the
"CPICH RSCP" field is set to "On".