User manual

Operating Procedures 4
N9360A Multi UE Tester W-CDMA User Manual 4-41
Figure 4-31 [Manual Test: Measuring] Screen for Location Update
9 After completion of location update, the display status
returns to Stand-by (
Figure 4-32).
Start MS Call or BS Call. The type of BS Call is "AMR" or
"RMC" according to the setting at the "BS Call" input field
in
step 7.
• To execute MS Call, perform step 10 to step 13, and then
proceed to step 25.
• To execute BS Call (AMR), perform step 14 to step 18,
and then proceed to step 25.
• To execute BS Call (RMC), perform step 19 to step 24,
and then proceed to step 25.