User manual

Operating Procedures 4
N9360A Multi UE Tester W-CDMA User Manual 4-37
Testing Mobile Phone Using Manual Test
This section describes the operation method of the Tester and a
mobile phone under the test by Manual Test.
Refer to “Testing a Mobile Phone by Manual Test (HSDPA
Mode)" on page 4-59 about HSDPA Test by Manual Test.
1 Turn on the Tester and select the W-CDMA system on the
[Top Menu] screen. Refer to
“System Selection" on
page 4-14 about selection of the system.
2 The [Initial] screen, shown in Figure 4-27, is displayed
after the tester has completed its initialization and
self-test routines.
Figure 4-27 [Initial] Screen