User manual

Operating Procedures 4
N9360A Multi UE Tester W-CDMA User Manual 4-35
19 At the "RF Test" step, measurement items set to "Run" on
the [Configuration: Test Sequence] screen are measured.
20 At the "BS Release" step, the Tester automatically finishes
the call.
21 When Sequence 2 is set on the [Configuration: Test
Sequence] screen, a test of Sequence 2 is performed
automatically. The test goes on in the same way as
Sequence 1.
Figure 4-25 [Automatic Test: Measuring] Sequence 2 Screen
22 After completion of all tests, the screen showing
measurement results is displayed.