User manual

Operating Procedures 4
N9360A Multi UE Tester W-CDMA User Manual 4-29
Figure 4-19 [Configuration: Test Sequence] Screen
5 Set the input fields with the CURSOR CONTROL knob.
• Set "Radio System 2" to "W-CDMA" or "-----". When "-----"
is set, only sequence 1 is executed. ("Radio System 1" is
fixed to "W-CDMA".)
• Set the test flow and measurement items field to "Run"
for execution or "-----" for skip.
6 Set the test condition
Press the Return softkey and then the Test C ondi tio n softkey
to display the [Configuration: Test Condition] screen.